Coarse-Skinned Corn Milling Cutter Tip

China Zhongyeda Coarse-Skinned Corn Milling Cutter Tip is widely used in agriculture for harvesting corn. It is particularly useful for small to medium-sized farms where manual harvesting is still prevalent. The tool can be used to cut corn cobs for various purposes, including canning, freezing, and processing.

The pointed corn milling cutter for insulating materials is a milling tool specially used for processing insulating materials. The pointed corn milling cutter for insulating materials is an efficient and durable milling tool, especially suitable for processing insulating materials and composite materials. During use, you should choose the appropriate milling cutter specifications, keep the cutting speed stable, clean and maintain regularly, and take safety precautions.

1. Product Overview

The pointed corn milling cutter for insulating materials, also known as corn cob milling cutter and scaly milling cutter, has a dense spiral mesh on the surface and a shallow groove. This milling cutter is particularly suitable for processing some functional materials, especially composite materials such as carbon fiber and glass fiber, as well as insulating materials such as synthetic stone, bakelite, epoxy board, and wave fiberboard.

2. Product Features

High hardness and wear resistance:

The pointed corn milling cutter for insulating materials is made of carbide rods and tungsten steel rods. It has the characteristics of high hardness, high wear resistance, high strength, etc., and can resist wear and impact during processing.

Sharp cutting edge:

The cutting edge is composed of many cutting units, which is sharp and can greatly reduce cutting resistance, achieve high-speed cutting, and improve processing efficiency and surface quality.

Spiral mesh design:

The surface of the milling cutter is designed with dense spiral mesh, which helps to remove chips and dissipate heat, reducing heat accumulation and tool wear during processing.

Tip design:

The tip part can easily enter the narrow processing area for fine milling.

Replaceable end design:

Some insulating material tip corn milling cutters adopt replaceable end design. When the end teeth are damaged, the end can be directly replaced without affecting the normal use of the milling cutter body, thereby saving the cost of use.

Product application

Insulating material tip corn milling cutters are widely used in mechanical processing, mainly used for rough milling to remove excess processing, as well as milling of small planes, step sides and bottoms, grooves, etc. Due to its excellent cutting performance and the characteristics of being suitable for a variety of insulating materials, this milling cutter plays an important role in the field of insulating material processing in the electronics, electrical, communications and other industries.

Precautions for use

Choose the appropriate milling cutter specifications:

Choose the appropriate milling cutter specifications according to the type, thickness and processing requirements of the processing material.

Keep the cutting speed stable:

During the processing, the cutting speed should be kept stable to avoid problems caused by too fast or too slow.

Regular cleaning and maintenance:

The cutting chips and coolant on the milling cutter should be cleaned in time after use to prevent corrosion and clogging. At the same time, the wear of the milling cutter should be checked regularly, and the severely worn parts should be replaced in time.

Safety protection:

During the operation, appropriate eye protection devices and protective clothing should be worn to prevent flying chips from injuring the eyes and body. At the same time, the safety protection devices of the machine tool should be ensured to be in good condition.