How to maintain the milling cutter of the engraving machine?

The milling cutter of the engraving machine is a tool specially used for engraving various materials. It has the ability to rotate at high speed and can quickly cut and engrave various shapes and patterns. However, the milling cutter of the engraving machine needs to be maintained regularly to extend its service life. So how much do you know about the maintenance of the milling cutter of the engraving machine? The following editor of Zhongyeda will introduce it to you.

How to maintain the milling cutter of the engraving machine?

1. Clean the milling cutter of the engraving machine. Use standard industrial solvents to remove dirt, target resin and other debris.

2. Apply an appropriate amount of engine oil to prevent the surface of the milling cutter of the engraving machine from rusting and damage.

3. Do not grind the tool or change the shape of the tool without authorization, because each grinding process requires professional mechanical equipment and professional grinding skills to meet the requirements of use, otherwise it is easy to cause the edge to break and cause industrial accidents.

4. The bearings cannot be cleaned with solvents such as wood oil or kerosene, otherwise it will destroy the special grease inside. Dust and dirt can be removed with a dust gun.

5. After the bearing has worked for 2-3 hours, a little lubricating oil should be added to extend the service life of the bearing.

6. Bearings that cannot rotate smoothly should be replaced immediately, and broken nuts, screws, and washers should be replaced in time.

To sum up, this is the introduction to the maintenance of the engraving machine milling cutter. The engraving machine milling cutter is an efficient and accurate tool that is widely used in many fields and can help people complete various processing tasks quickly and accurately.